Schiffli embroidery – start stitching
2020-09-15 10:51
How to Start Stitching
The putting the fabric, the frame has to be moved into horizontal zero (0) positions and moved downwards until the distance between length-tension bar and needles is about 3 cm. If you run designs with cutting at the beginning of the design on machines with automatic cutting device leave a gap of 6 cm (for machines with length-tension bars only).
Before embroidering at full speed it is recommended to manually start embroidering with approximately 10 stitches in order to avoid errors in the pattern. Control whether all yarns have been embroidered.
If there are irregularities check the shuttles once again and thread the yarn properly. Tear off the loose thread ends or cut them (when using delicate fabrics) with blunt pointed scissors (avoids damaging the fabric) in order to avoid stitching on top of them. It is necessary to adjust the thread tension, especially when using new materials.
How to check Tension
Stop the machine, go to the back of the machine, open the shuttle box and check tension at the flat stitches where tension is best visible. Amount of shuttle yarn visible on the back should be low.
Related News
More >-
![some details about hot fused/heat seal/welded seams/thermo-bonded]()
some details about hot fused/heat seal/welded seams/thermo-bonded
It is more and more people like padded jackets were made with welded seams, because it is quite different with quilting seams, moreover, welded seams are more waterproof and windproof as there is not needle holes like stitching quilting seams. But there are some details we need to consern in advance, some workmanships are different which makes fabric materials and filling materials need to meet specific requirements.
-
![Classification of Fabric Weave Patterns]()
Classification of Fabric Weave Patterns
List of fabric weave patterns | type of fabric weave patterns | fabric weave pattern names In the simplest weaving arrangement, alternate warp yarns are over or under the shuttle as it moves in one direction and the warp yarn positions are reversed for the return stroke of the shuttle. This weave can be made on a loom with only two harnesses. In other arrangements, several warp yarns may be moved upward or downward together, or several filling picks may take place before the warp yarns change position.
-
![some stitching types of garment]()
some stitching types of garment
some common stitching types for apparel, which are applied in different kinds of clothings, i will list 3 types: topstitching, flatlock stitching, overlock stitching, which are most common for our daily clothing.
-
![Fabric Weaving Basics]()
Fabric Weaving Basics
Making of Woven fabrics The process of producing a fabric by interlacing warp and weft threads is known as weaving. The machine used for weaving is known as weaving machine or loom. Weaving is an art that has been practiced for thousands of years. The earliest application of weaving dates back to the Egyptian civilization. In order to interlace wrap and weft threads to produce a fabric, the basic mechanisms necessary for any type of looms are Primary, Secondary and Auxiliary mechanisms.
-
![Combination twill weaving]()
Combination twill weaving
Combination twills find extensive use in the worsted industry in the production of garment fabrics, as these weaves are capable of producing compact textures. These twills are constructed by two methods 1. End and end combination 2.Pick and pick combination. In the first method the twill weaves are combined end way and in the second method twill weaves are combined in pick way. In combination with twill weaves two different types of continuous twills are combined together alternately.
-
![Broken Twills – weaving]()
Broken Twills – weaving
A broken twill weave composed of vertical sections which are alternately right hand and left hand in direction. In Broken Twills, twills are constructed by breaking the continuity of any continuous twill weave. They are formed by reversing the pattern part way through the repeat. The Break can be achieved in different ways.
-
![Diamond and Diagonal Weaves]()
Diamond and Diagonal Weaves
Diagonal weave are basically type of twill weaves confined to bold twills running at angles greater than 45°, although often regular 45° twills are spoken of as diagonals; regular diagonals are generally formed by combining two regular 45° twills in their picks or ends.Diamond weaves are type of twill weave which forms the shape of a perfect diamond.
-
![Basic Weaving Operations]()
Basic Weaving Operations
In weaving, no matter what type of weaving is being done, four major operations are performed in sequence and are continuously repeated, they are Shedding, Picking, Beating Up, Taking Up and Letting Off.
Get the latest price? We'll respond as soon as possible(within 12 hours)